Announcement

Collapse
No announcement yet.

Paralleling Generator with defective synchrometer?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Paralleling Generator with defective synchrometer?

    How to parallel generator when Synchroscope is defective?

  • #2
    If Synchrometer is faulty, use emergency synchro lamps provided in the MSB.

    If that is also not available, use a pair of 500volt Voltmeter and connect it to the incoming generator circuit breaker. Let the incoming generator be stable after starting it by checking the voltmeter needle; it should move from 0 to maximum very slowly. Close the circuit when the Voltmeter needle very slowly pass over 0V value.



    Comment

    Working...
    X