Announcement

Collapse
No announcement yet.

UV sterilizer maintenance precaution on ship?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • UV sterilizer maintenance precaution on ship?

    If we want to do maintenance on UV sterilizer, what safety precautions need to be taken?

  • #2
    Hello! abhishek : To obtain maximum efficiency and operation of the sterilizer ensure all sections of the manual read carefully.
    Don’t touch any electric equipment with wet hands.
    Protect your eye and skin against the ultra violet.
    Turn off the power and drain out all water before replacing the filter.
    Don’t pressure too much when assembling the gland fittings, since it’s very sensitive
    part to be broken easily.
    Before the replacement, be sure to clean with soft dry cloth.
    U.V. sterilizer has very sensitive components like U.V. lamp and Quartz sleeve.
    Therefore, please pay attention a lot when use it.
    Please turn off the running switch, if it wouldn’t be operating.
    Please drain out and close the inlet valve, if it wouldn’t be operating.

    Comment


    • #3
      Originally posted by deepak View Post
      Hello! abhishek : To obtain maximum efficiency and operation of the sterilizer ensure all sections of the manual read carefully.
      Don’t touch any electric equipment with wet hands.
      Protect your eye and skin against the ultra violet.
      Turn off the power and drain out all water before replacing the filter.
      Don’t pressure too much when assembling the gland fittings, since it’s very sensitive
      part to be broken easily.
      Before the replacement, be sure to clean with soft dry cloth.
      U.V. sterilizer has very sensitive components like U.V. lamp and Quartz sleeve.
      Therefore, please pay attention a lot when use it.
      Please turn off the running switch, if it wouldn’t be operating.
      Please drain out and close the inlet valve, if it wouldn’t be operating.
      Using uv sterilizer is very risky one more precautions are there ..You must follow the steps as brother told above..

      Comment

      Working...
      X